Dillon - Crane Scales

AP Dynamometer

The mechanical dynamometer has proven its value in such diverse jobs as mounting cables for bridges, adjusting tension on guy wires, field testing chain, rope, wire and anything requiring precision force or tension measurement. It may also be used for overhead weighing and other basic tensioning applications. These come with standard size shackles and pins, maximum pointer and zero adjust for tare. Various capacities allow for matching the product to the application.

• Capacities available from 500 to 100,000 lb, 200 to 50,000 kg and 2,000 to 500,000 Newtons
• Heavy alumium alloy case with baked protective finish
• Sealed dial face with cushioned rubber gasket
• Safe for overhead weighing applications
• Zero control

AP Dynomoeter Literature

ED Junior

The EDjunior is an extremely well-built instrument that gets straight to the point - apply a load and take a reading. Its Spartan design is a direct response to industries that have wanted a well-built instrument that could be relied upon for simple, yet critical measurements of force and weight.

• NEMA4/IP55 design
• 6 Digit LCD display
• Peak detection
• Battery operation (C size)
• Capacties from 2,500lb to 25,000lb (1,000kg to 10,000kg) 

 ED Junior Literature

ED Xtreme

A modular dynamometer so flexible it can serve as a simple hanging scale or can form the hub of a complex weighing system.

• Superior strength and corrosion resistance
• 5:1 strength and saftey ratio
• Cases made from aircraft quality aluminum or plated alloy steel
• Nema 4X/IP55
• LCD Display with thick lexan panel protection
• Easy access battery compartment
• Optional remote control, cotrols one or many devices
• Capacities from 2,500lb to 550,000lb (1000kg to 250,000kg)

 ED Xtreme Literature

Dyna-Switch

Dillon load limit Dyna-Switches are the economical answer to process control weighing, automation and overload applications where electrical circuits need to be activated proportional to load.

• Measure either tension or compression force
• Each force beam can accomodate from one to four switches
• One Dyna-Switch can be set to operate up to four different switching functions or combinations including slack line detection
• 5:1 Ultimate Safety Factor (4.5:1 on metric models)
• Capacities from 100lb to 50,000lb

 Dyna-Switch Literature

Cranegard

Cranegard force control switches provide crane overload protection and slackline detection.

• Clamps directly on hoist or crane wire rope
• Each Cranegard can include from one to four switches, each with a preset load limit.
• Cranegard's preset switches activate a warning light or audible alarm or interrupt a crane's power source when cable loads reach specified levels

  Cranegard Literature